Important Notice
Design values are presented in this document in both metric and U.S. customary units and were developed independently within each system. The relationship between the metric and U.S. customary values is neither an exact (soft) conversion nor a completely rationalized (hard) conversion. The metric values are those that would have been used had this document been presented exclusively in metric units; The U.S. customary values are those that would have been used if this document had been presented exclusively in U.S. customary Units. Therefore, the user is advised to work completely in one system and not attempt to convert directly between the two.
- B-L (97) - Barrier Legend
- B-1 - Guardrail Applications
- B-1 (97) -1 - Plans - (Type 1, Type 2, and Type 3)
- B-1 (97) - 2 - Elevations and Splice Detail
- B-1 (97) - 3 - Section Views
- B-2 (97) - Guardrail Over Culverts, Type 1
- B-3 (97) - Guardrail Over Culverts, Type 2
- B-4 (97) - Curved Guardrail Section
- B-5 (98) - End Anchorage
- B-6 (97) - Buried End Section
- B-7 - Guardrail to Barrier Connection, Approach Type 1
- B-7 (97) - 1 - Plan, Elevation and Sections
- B-7 (97) - 2 - Wood Blockout, Rub Rail Wood Blocks, Bearing Plate, Rub Rail to Barrier Connection Details
- B-7 (97 )- 3 - Bent Plate Rub Rail Details
- B-8 - Guardrail to Barrier Connection, Approach Type 2
- B-8 (97) - 1 - Plan, Elevation, and Sections
- B-8 (97) - 2 - Notes, Bent Rail, Details, Block Schedule
- B-9 (97) - Guardrail to Barrier Connection, Exit Type
- B-10 (97) - Bridge Rail Retrofit, Type 1
- B-11 - Bridge Rail Retrofit, Type 2
- B-11 (97) - 1 - Plan, Section A-A, Base Plate Detail
- B-11 (97) - 2 - W 6x15 Steel Post
- B-12 (97) - Bridge Rail Retrofit, Type 3
- B-13 - Hardware
- B-13 (97) - 1 - W-Beam and Back-up Plate Details
- B-13 (97) - 2 - W-Beam Steel Post and Offset Block
- B-13 (98) - 3 - W-Beam Terminal Connector
- B-13 (97) - 4 - Thrie Beam and Thrie Beam Back-up Plate
- B-13 (97) - 5 - Thrie Beam Steel Post and Offset Block
- B-13 (97) - 6 - W-Thrie Beam Transition Section
- B-13 (97) - 7 - Wood Block, Soil Plate, Short Wood Breakaway Post, Steel Tube, Long Wood Breakaway Post
- B-13 (98) - 8 - Swaged Cable and Related Hardware Assembly
- B-13 (97) - 9 - Reflectorized Washer and Bearing Plate Detail
- B-13 (99) - 10 - Guardrail Bolt & Recessed Nut
- B-13 (97) - 11 - 16mm Hex Bolt, Hex Nut, & Steel Washer, High-Strength Structural Hex Bolt & Hex Nut
- B-13 (97) - 12 - 24mm Hex Nut & Steel Washer, 16mm Carriage Bolt, Hex Nut, & Steel Washer
- B-14 - Concrete Safety Barrier (F Shape)
- B-14 (97) - 1 - Typical Cast in Place or Slip Form Construction
- B-14 (97) - 2 - Typical Pre-Cast Construction
- B-15 - Portable Concrete Safety Barrier (F Shape)
- B-15 (97) - 1 - Plan, Elevation, and Section View
- B-15 (97) - 2 - Transition
- B-15 (97) - 3 - Tapered End Section
- B-15 (97) - 4 - Typical Reinforcement Details
- B-15 (97) - 5 - Joint Connection Details
- B-16 (97) - Slotted Plate Connection Details
- C-1 (97) - P.C.C. Curb & Gutter, and Hot-Mix Curb
- C-2 - Curb Ramps
- C-2 97) - 1 - Type 1
- C-2 (97) - 2 - Types 2, 3, & 4
- C-2 (97) - 3 - Sections for Types 2, 3, & 4
- C-2 (97) - 4 - Type 5
- C-3 (97) - Entrances
- D-1 - 6:1 Safety End Structure
- D-1 (98) - 1 - Detail Views
- D-1 (98) - 2 - Schedules
- D-2 - 10:1 Safety End Structure
- D-2 (98) - 1 - Detail Views
- D-2 (98) - 2 - Schedules
- D-3 (98) - Safety End Structure Grate
- E-1 (97) - Incremental Stabilization
- E-2 (98) - Silt Fence
- E-3 (98) - Drainage Inlet Sediment Control
- E-4 (98) - Curb Inlet Sediment Control
- E-5 (97) - Stone Check Dam
- E-6 (97) - Sediment Trap
- E-7 (97) - Sediment Trap, Using Drainage Inlet as Outlet
- E-8 - Riser Pipe Assembly for Sediment Trap
- E-8 (98) - 1 - Elevation
- E-8 (98) - 2 - Trash Hood Details
- E-9 (98) - Erosion Control Blanket Applications
- E-10 (98) - Riprap Ditch
- E-11 (98) - Temporary Swale
- E-12 (98) - Perimeter Dike/Swale
- E-13 (98) - Earth Dike
- E-14 (98) - Temporary Slope Drain
- E-15 (97) - Stilling Well
- E-16 (98) - Sump Pit, Type 1 & 2
- E-17 (98) - Dewatering Basin
- E-18 (98) - Geotextile-Lined Channel Diversion
- E-19 (97) - Sandbag Diversion
- E-20 (98) - Sandbag Dike
- E-21 (97) - Stabilized Construction Entrance
- E-22 (98) - Skimmer Dewatering Device
- E-23 - Turbidity Curtain
- E-23 (98) - 1 - Floating Turbidity Curtain
- E-23 (98) - 2 - Staked Turbidity Curtain
- E-24 (98) - Portable Sediment Tank
- P-1 - P.C.C. Pavement
- P-1 (97) - 1 - Slab Plan (with Dowel and Tie Locations)
- P-1 (97) - 2 - Joint and Sealant Details
- P-1 (97) - 3 - W Bolt, Hook Bolt, Dowel & Tie Bar
- P-1 (97) - 4 - Dowel Support Basket
- P-1 (97) - 5 - Dowel & Tie Bar Placement Tolerances
- T-1 (97) - Conduit Junction Well, Types 1, 2, and 3
- T-2 (97) - Conduit Junction Well, Type 4
- T-3 (97) - Conduit Junction Well, Type 5
- T-4 (97) - Cabinet Bases (Type "M" and "P")
- T-5 - Pole Bases
- T-6 (97) - Special Pole Base
- T-7 (97) - Sign Foundation
- T-8 (97) - Loop Detector to Conduit Junction Well Connection
- T-9 (97) - Type #1 Loop Detector
- T-10 (97) - Type #2 Loop Detector